Set Automatic-Tag; Set Comm-List Delete - Dell Force10 Z9000 Reference Manual

set automatic-tag

Configure a filter to automatically compute the tag value of the route.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax set automatic-tag
To return to the default, enter no set automatic-tag.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Related
set level
Commands
set metric
set metric-type
set tag

set comm-list delete

Configure a filter to remove the specified community list from the BGP route's COMMUNITY attribute.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax set comm-list community-list-name delete
To insert the community list into the COMMUNITY attribute, use the no set comm-list
community-list-name delete command.
Parameters
community-list-
name
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
Version 8.3.11.1
Version 8.3.7.0
294
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– specify the OSPF area for route redistribution.
– specify the metric value assigned to redistributed routes.
– specify the metric type assigned to redistributed routes.
– specify the tag assigned to redistributed routes.
Enter the name of an established Community list, up to 140
characters.
Introduced on the Z9000.
Introduced on the S4810.