Monitor Interface - Dell Force10 Z9000 Reference Manual

monitor interface

Monitor counters on a single interface or all interfaces on a line card. The screen is refreshed every five seconds and
the CLI prompt disappears.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax monitor interface [interface]
To disable monitoring and return to the CLI prompt, press the q key.
Parameters
interface
Command Modes
Command History
Version 8.3.11.1
Version 8.5.1.0
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.0
Usage In the Example, the delta column displays changes since the last screen refresh.
Information
The following are the monitor command menu options.
(OPTIONAL) Enter the following keywords and slot/port or number
information:
•
•
•
•
•
•
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
For an 100/1000 Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For the management port, enter the keyword
managementethernet followed by the slot (0-1) and the
port (0).
For a SONET interface, enter the keyword sonet followed by
the slot/port.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
711