Mac-Address-Table Static - Dell Force10 Z9000 Reference Manual

show mac-address-table aging-time

mac-address-table static

Associate specific MAC or hardware addresses to an interface and VLANs.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax mac-address-table static mac-address {multicast vlan vlan-id
output—range interface}{output interface vlan vlan-id}
To remove a MAC address, use the no mac-address-table static mac-address
output interface vlan vlan-id command.
Parameters
mac-address
multicast
output
interface
output-range
interface
918
– displays the MAC aging time.
Enter the 48-bit hexidecimal address in nn:nn:nn:nn:nn:nn format.
Enter a vlan port to where L2 multicast MAC traffic is forwarded.
NOTE: Use this option if you need to have multicast functionality
in an L2 VLAN without IGMP protocols.
For a unicast MAC address, enter the keyword output followed by
one of the following interfaces for which traffic needs to be
forwarded:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword sonet followed by
the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
For a multicast MAC address, enter the keyword output-range
followed by one of the following interfaces to indicate a range of
ports for which traffic needs to be forwarded:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.