Control Plane Policing (CoPP)
The CoPP commands are supported on the Dell Force10 S4810 and Z-Series platforms.
control-plane-cpuqos
Enter control-plane mode and configure the switch to manage control-plane traffic.
Z-Series, S4810
Syntax
control-plane-cpuqos
Defaults
Not configured.
Command Modes
CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.8.0
service-policy rate-limit-cpu-queues
Apply a policy map for the system to rate limit control traffic on a per-queue basis.
S4810, Z-Series
Syntax
service-policy rate-limit-cpu-queues policy-name
Parameters
policy-name
Defaults
Not configured.
Command Modes
CONTROL-PLANE-CPUQOS
Command History
Version 8.3.11.1
Version 8.3.8.0
Introduced on the Z9000.
Introduced on the S4810.
Enter the service-policy name, using a string up to 32 characters.
Introduced on the Z9000.
Introduced on the S4810.
11
561