Show Interfaces Dampening - Dell Force10 Z9000 Reference Manual

show interfaces dampening

Display interface dampening information.
C-Series, E-Series, S-Series, Z-Series
Syntax show interfaces dampening [[interface] [summary] [detail]]
Parameters
interface
summary
detail
Defaults none
Command Modes EXEC
Command History
Version 8.3.11.1
Version 8.5.1.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 7.4.1.0
Example
FTOS#show interfaces dampening
Interface Supp
Gi 3/2
Gi 3/10
FTOS#
(Optional) Enter one of the following keywords and slot/port or
number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword sonet followed by
the slot/ port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
(OPTIONAL) Enter the keyword summary to display the current
summary of dampening data, including the number of interfaces
configured and the number of interfaces suppressed, if any.
(OPTIONAL) Enter the keyword detail to display detailed interface
dampening data.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced
Flaps Penalty Half-Life Reuse Suppress Max-Sup
State
Up 0 0
Up 0 0
20 800 4500
5 750 2500
120
20
729