Logging Coredump Server - Dell Force10 Z9000 Reference Manual

Ftos command line reference guide for the z9000 system ftos 9.1.(0.0)
Hide thumbs Also See for Force10 Z9000:
Table of Contents

Advertisement

Usage
The Kernel core dump can be large and may take up to five to 30 minutes to upload. FTOS does
Information
not overwrite application core dumps so you should delete them as necessary to conserve
space on the flash. If the flash is out of memory, the coredump is aborted. On the S-Series, if
the FTP server is not reachable, the application coredump is aborted. FTOS completes the
coredump process and wait until the upload is complete before rebooting the system.
Related

logging coredump server

Commands
logging coredump server
Enable the platform to send application core dumps to an FTP server.
C-Series, E-Series, S-Series, Z-Series
Syntax
logging coredump server {ftp-server | ip-address | ipv6-
address} username (ftp-username | name} password [type] {ftp-
password | password}
Parameters
ftp-server
ip-address
ipv6-address
name
ftp-username
type
password
ftp-password
Defaults
Crash kernel files are uploaded to flash by default.
Command Modes
CONFIGURATION
Command History
Version 9.0.0.0
Version 8.3.11.1
Version 8.4.1.0
568
– designates a server to upload kernel core-dumps.
Enter the hostname or IP address of the FTP server where FTOS
sends application core dumps.
Enter the IP address of the target server in dotted decimal format.
Enter an IPv6 address of the target server, in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
Enter a username to access the target server.
Enter the user name to access the target ftp server.
Enter the password type:
Enter 0 to enter an un-encrypted password.
Enter 7 to enter a password that has already been encrypted
using a Type 7 hashing algorithm.
Enter a password to access the target server.
Enter the password of the target ftp server where the application
core dump files will be uploaded. The password can be up to 15
alphanumeric characters; no special characters are allowed.
Added information about ftp password and URL to
Introduced on the Z9000.
Added support for IPv6.
Usage Information .

Advertisement

Table of Contents
loading

Table of Contents