Dell Force10 Z9000 Reference Manual page 1075

Parameters
process-id
database-
summary
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Usage The following describes the show ip ospf process-id database command shown
Information in the Example below.
Field
Link ID
ADV Router
Age
Seq#
Checksum
Link count
Example
FTOS>show ip ospf 1 database
Link ID
11.1.2.1
13.1.1.1
192.68.135.2 192.68.135.2 1419 0x80000294 0x9cbd
Link ID
10.2.3.2
10.2.4.2
Link ID
0.0.0.0
Enter the OSPF Process ID to show a specific process. If no Process
ID is entered, command applies only to the first OSPF process.
(OPTIONAL) Enter the keywords database-summary to the
display the number of LSA types in each area and the total number of
LSAs.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Added support of Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Identifies the router ID.
Identifies the advertising router's ID.
Displays the link state age.
Identifies the link state sequence number. This number allows you to
identify old or duplicate link state advertisements.
Displays the Fletcher checksum of an LSA's complete contents.
Displays the number of interfaces for that router.
OSPF Router with ID (11.1.2.1) (Process ID 1)
Router (Area 0.0.0.0)
ADV Router
11.1.2.1
13.1.1.1
Network (Area 0.0.0.0)
ADV Router
13.1.1.1
192.68.135.2 908
Type-5 AS External
ADV Router
192.68.135.2 908
Age Seq# Checksum Link count
673 0x80000005 0x707e
676 0x80000097 0x1035
Age Seq# Checksum
676 0x80000003 0x6592
0x80000055 0x683e
Age Seq# Checksum Tag
0x80000052 0xeb83
2
2
1
100
1075