Show Interfaces Status - Dell Force10 Z9000 Reference Manual

show interfaces status

Display a summary of interface information or specify a line card slot and interface to display status information on that
specific interface only.
C-Series, E-Series, S-Series, Z-Series
Syntax show interfaces [interface | linecard slot-number] status
Parameters
interface
linecard
number
Defaults none
Command Modes
Command History
Version 8.3.11.1
Version 8.5.1.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 7.5.1.0
Example
FTOS#show interfaces status
Port
Gi 0/0
Gi 0/1
Gi 0/2
Gi 0/3
Gi 0/4
Gi 0/5
Gi 0/6
Gi 0/7
1502,1504,1506-1508,1602
Gi 0/8
(OPTIONAL) Enter one of the following keywords and slot/port or
number information:
•
•
•
slot-
(OPTIONAL) Enter the keyword linecard followed by the slot
number. For the C-Series, the range is 0 to 7 for C300 and 0 to 3 for
C150. For the E-Series, the range is 0 to 13 on the E1200, 0 to 6 on the
E600, and 0 to 5 on the E300
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
FTOSPort Up
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
Status Speed
Up 1000 Mbit Auto
Down Auto
Down Auto
Down Auto
1000 Mbit Auto
Down Auto
Down Auto
Up 1000 Mbit Auto
Down Auto
Duplex Vlan
--
Auto 1
Auto 1
Auto --
30-130
Auto --
Auto --
Auto --
737