Show Ip Bgp Ipv4 Multicast - Dell Force10 Z9000 Reference Manual

To stop redistribution of OSPF routes, use the no redistribute ospf process-id
command.
Parameters
process-id
match external {1
| 2}
match internal
route-map
name
Defaults Not configured.
Command Modes ROUTER BGP Address Family (conf-router_bgp_af)
Command History
Version 7.8.1.0
Version 7.7.1.0
Version 7.6.1.0
Usage
When you enter the redistribute isis process-id command without any other
Information
parameters, FTOS redistributes all OSPF internal routes, external type 1 routes, and external
type 2 routes. This feature is not supported by an RFC.
This feature is not supported by an RFC.

show ip bgp ipv4 multicast

View the current MBGP routing table for the system.
C-Series, E-Series TeraScale, S-Series
Syntax show ip bgp ipv4 multicast [detail | network [network-mask]
[length]]
Parameters
detail
network
network-mask
longer-prefixes
Command Modes
Enter the number of the OSPF process. The range is 1 to 65535.
(OPTIONAL) Enter the keywords match external to redistribute
OSPF external routes. You can specify 1 or 2 to redistribute those
routes only.
(OPTIONAL) Enter the keywords match internal to redistribute
OSPF internal routes only.
map- (OPTIONAL) Enter the keywords route-map followed by the name
of a configured route map.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced IPv6 MGBP on the E-Series.
(OPTIONAL) Enter the keyword detail to display BGP internal
information for the IPv4 Multicast address family.
(OPTIONAL) Enter the network address (in dotted decimal format) of
the BGP network to view information only on that network.
(OPTIONAL) Enter the network mask (in slash prefix format) of the
BGP network address.
(OPTIONAL) Enter the keywords longer-prefixes to view all
routes with a common prefix.
• EXEC
• EXEC Privilege
433