Ip Proxy-Arp; Ip Redirects - Dell Force10 Z9000 Reference Manual

You can separately configure both IPv4 and IPv6 domain name servers.
Related ipv6 name-server
Commands

ip proxy-arp

Enable proxy ARP on an interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip proxy-arp
To disable proxy ARP, use the no ip proxy-arp command.
Defaults Enabled.
Command Modes INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Related show ip interface
Commands

ip redirects

Enable the interface to send ICMP redirect messages.
E-Series
Syntax ip redirects
To return to default, use the no ip redirects command.
Defaults Disabled.
Command Modes INTERFACE
Command History
Version 8.1.1.0
– configures an IPv6 name server.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– displays the interface routing status and configuration.
Introduced on the E-Series ExaScale.
793