Show Config; Show Route-Map - Dell Force10 Z9000 Reference Manual

Defaults Not configured.
Command Modes ROUTE-MAP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage If you do not use the set weight command, router-originated paths have a weight attribute
Information
of 32768 and all other paths have a weight attribute of zero.

show config

Display the current route map configuration.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show config
Command Modes ROUTE-MAP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Example
FTOS(config-route-map)#show config
!
route-map hopper permit 10
FTOS(config-route-map)#

show route-map

Display the current route map configurations.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show route-map [map-name]
302
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.