Show Gvrp Statistics - Dell Force10 Z9000 Reference Manual

Defaults none
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Usage If no ports are GVRP participants, the message output changes from GVRP Participants
Information running on <port_list> to GVRP Participants running on no ports.
Example
R3#show gvrp brief
GVRP Feature is currently enabled.
Port
----------------------------------------------
Gi 3/0
Gi 3/1
Gi 3/2
Gi 3/3
Gi 3/4
Gi 3/5
Gi 3/6
Gi 3/7
Gi 3/8
R3#show gvrp brief
Related

show gvrp statistics

Commands
show gvrp statistics
Display the GVRP configuration statistics.
C-Series, E-Series, S-Series, Z-Series
Syntax show gvrp statistics {interface interface | summary}
Parameters
interface
interface
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on C-Series, E-Series, and S-Series
GVRP Status
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
– displays the GVRP statistics.
(OPTIONAL) Enter the keyword interface followed by one of the
interface keywords and slot/ port or number information:
•
•
•
Edge-Port
No
No
No
No
No
No
No
No
No
For a Fast Ethernet interface, enter the keyword
FastEthernet followed by the slot/ port information.
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
657