show processes switch-utilization
Show switch fabric utilization.
E-Series
Syntax
show processes switch-utilization
Command Modes
Command History
Version 8.1.1.0
E-Series
Usage
An asterisk ( * ) in the output indicates a legacy card that is not support by the show
Information
processes switch-utilization command.
Example
FTOS#show processes switch-utilization
Switch fabric utilization 5Sec 1Min 5Min
------------------------------------------
3%
show rpm
Show the current RPM status.
C-Series, E-Series
Syntax
show rpm [number [brief] | all]
Parameters
number
all
brief
Command Modes
Command History
Version 8.1.1.0
Version 7.5.1.0
•
EXEC
•
EXEC Privilege
Introduced on the E-Series ExaScale.
Original command.
3%
3%
(OPTIONAL) Enter either zero (0) or 1 for the RPM.
(OPTIONAL) Enter the keyword all to view a table with information
on all present RPMs.
(OPTIONAL) Enter the keyword brief to view an abbreviated list of
RPM information.
•
EXEC
•
EXEC Privilege
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
171