Clear Ip Bgp * (Asterisk) - Dell Force10 Z9000 Reference Manual

Defaults 40960000 bytes
Command Modes
Command History
Version 8.2.1.0
Version 7.5.1.0
Related
Commands

clear ip bgp * (asterisk)

Reset all BGP sessions in the specified category on the E-Series. The soft parameter (BGP Soft Reconfiguration) clears
the policies without resetting the TCP connection.
C-Series, E-Series
Syntax clear ip bgp * [ipv4 multicast soft [in | out] | ipv6 unicast
soft [in | out] | soft [in | out]]
Parameters
*
ipv4 multicast
soft [in | out]
ipv6 unicast soft
[in | out]
soft
in
out
Command Modes EXEC Privilege
Command History
Version 8.2.1.0
Version 7.4.1.0
• EXEC
• EXEC Privilege
Introduced on the E-Series ExaScale.
Introduced
• show capture bgp-pdu neighbor
• capture bgp-pdu neighbor
Enter an asterisk ( * ) to reset all BGP sessions.
(OPTIONAL) This keyword sequence sets options within the a
specified IPv4 address family.
(OPTIONAL) This keyword sequence sets options within the a
specified IPv6 address family.
(OPTIONAL) Enter the keyword soft to configure and activate
policies without resetting the BGP TCP session, that is, BGP Soft
Reconfiguration.
NOTE: If you enter clear ip bgp ip6-address soft,
both inbound and outbound policies are reset.
(OPTIONAL) Enter the keyword in to activate only inbound policies.
(OPTIONAL) Enter the keyword out to activate only outbound
policies.
Introduced on the E-Series ExaScale.
Introduced
– configures a route reflector and clients.
– enables capture of an IPv4 BGP neighbor packet.
467