Match Community - Dell Force10 Z9000 Reference Manual

Command Modes ROUTE-MAP
Command History
Version 8.3.11.1
Version 8.1.1.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Related set as-path
Commands

match community

Configure a filter to match routes that have a certain COMMUNITY attribute in their BGP path.
C-Series, E-Series, S-Series, Z-Series
Syntax match community community-list-name [exact]
To delete a community match filter, use the no match community command.
Parameters
community-list-
name
exact
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Related
ip community-list
Commands
set community
neighbor send-community
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Increased the name string to accept up to 140 characters. Prior to
7.8.1.0, names are up to 16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– adds information to the BGP AS_PATH attribute.
Enter the name of a configured community list.
(OPTIONAL) Enter the keywords exact to process only those routes
with this community list name.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– configures an Community Access list.
– specifies a COMMUNITY attribute.
– sends COMMUNITY attribute to peer or peer group.
285