Show Hardware Layer2; Show Hardware Layer3 - Dell Force10 Z9000 Reference Manual

show hardware layer2

Display Layer 2 ACL or eg data for the selected stack member and stack member port-pipe.
S-Series, Z-Series
Syntax show hardware layer2 {eg-acl | in-acl} stack-unit id port-set
0-3
Parameters
eg-acl | in-acl
stack-
port-set
Defaults none
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 7.8.1.0
Usage The unit numbers given are internal port numbers. For a cross reference of the internal and
Information user port numbers, refer to the
Configuration Guide for the Z9000 System .

show hardware layer3

Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
S-Series, Z-Series
Syntax show hardware layer3 {acl | qos} stack-unit 0-7 port-set 0-1
Parameters
acl | qos
stack-unit
port-set
Defaults none
Command Modes EXEC Privilege
Command History
Version 8.3.11.0
Enter either the keyword eg-acl or the keyword in-acl to select
between ingress or egress ACL data.
unit id
Enter the keyword stack-unit to select a stack ID. The unit ID
range for the Z9000 is 0.
0-3
Enter the keywords port-set with a port-pipe number — 0 or 3.
The S25 models of the S-Series have only port-pipe 0.
Introduced on the Z9000.
Introduced on the S-Series.
Z9000 Debugging and Diagnostics chapter in the FTOS
Enter either the keyword acl or the keyword qos to select between
ACL or QoS data.
0-7
Enter the keywords stack-unit followed by a numeral from 0 to 7
to select a stack ID.
0-1 Enter the keyword port-set with a port-pipe number, 0 or 1.
NOTE: The S25 models of the S-Series have only port-pipe 0.
Introduced on the Z9000.
581