Resequence Prefix-List Ipv4 - Dell Force10 Z9000 Reference Manual

StartingSeqNum
Step-to-
Increment
Defaults none
Command Modes
Command History
Version 8.3.11.1
Version 8.2.1.0
Version 8.1.1.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 7.4.1.0
Usage
When you have exhausted all the sequence numbers, this feature permits re-assigning a new
Information
sequence number to entries of an existing access-list.
Related

resequence prefix-list ipv4

Commands
resequence prefix-list ipv4
Re-assign sequence numbers to entries of an existing prefix list.
C-Series, E-Series, S-Series, Z-Series
Syntax resequence prefix-list ipv4 {prefix-list-name StartingSeqNum
Step-to-increment}
Parameters
prefix-list-name
StartingSeqNum
Step-to-
Increment
Defaults none
Command Modes
Enter the starting sequence number to resequence. The range is 0 to
4294967290.
Enter the step to increment the sequence number. The range is 1 to
4294967290.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the E-Series ExaScale (IPv6).
Introduced on the E-Series ExaScale (IPv4).
Increased the name string to accept up to 140 characters. Prior to
7.8.1.0, names were up to 16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– resequences a prefix list.
Enter the name of the configured prefix list, up to 140 characters long.
Enter the starting sequence number to resequence. The range is 0 to
65535.
Enter the step to increment the sequence number. The range is 1 to
65535.
• EXEC
• EXEC Privilege
223