Dell Force10 Z9000 Reference Manual page 1043

spf
database-timer
rate-limit
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 8.3.8.0
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Usage The following describes the debug ip ospf command shown in the Example below.
Information
Field
8:14
OSPF
v:
t:
l:
rid:
aid:
chk:
aut:
(OPTIONAL) Enter the keyword spf to display the Shortest Path First
information.
(OPTIONAL) Enter the keywords database-timer rate-
limit to display the LSA throttling timer information. This applies to
the S4810 platform only.
Introduced on the Z9000.
Added the database-timer rate-limit option for the S4810.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the time stamp.
Displays the OSPF process ID: instance ID.
Displays the OSPF version. FTOS supports version 2 only.
Displays the type of packet sent:
• 1 - Hello packet
• 2 - database description
• 3 - link state request
• 4 - link state update
• 5 - link state acknowledgement
Displays the packet length.
Displays the OSPF router ID.
Displays the Autonomous System ID.
Displays the OSPF checksum.
States if OSPF authentication is configured. One of the following is
listed:
• 0 - no authentication configured
• 1 - simple authentication configured using the ip ospf
authentication-key command
1043