Show Tcp Statistics - Dell Force10 Z9000 Reference Manual

Ftos command line reference guide for the z9000 system ftos 9.1.(0.0)

Hide thumbs Also See for Force10 Z9000:

Table of Contents

show ip cam stack-unit

show tcp statistics

View information on TCP traffic through the switch.

C-Series, E-Series, S-Series, Z-Series, S4810

show tcp statistics {all | cp | rp1 | rp2}

Command Modes

EXEC Privilege

Command History

Version 8.3.11.1

Version 8.3.7.0

Version 8.1.1.0

Version 6.4.1.0

The following describes the show tcp statistics cp command shown in the Example

– displays the CAM table.

Enter the keyword all to view all TCP information.

Enter the keyword cp to view only TCP information from the Control

Enter the keyword rp1 to view only TCP statistics from Route

Processor 1.

Enter the keyword rp2 to view only TCP statistics from Route

Processor 2.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the E-Series ExaScale.