port-vlan-id
vlan-name
Defaults
Disabled.
Command Modes
CONFIGURATION (conf-lldp) and INTERFACE (conf-if-
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Version 7.4.1.0
Related
protocol lldp (Configuration)
Commands
debug lldp interface
show lldp neighbors
show running-config lldp
advertise dot3-tlv
Advertise dot3 TLVs (Type, Length, Value).
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
advertise dot3-tlv {max-frame-size}
To remove advertised dot3-tlv, use the no advertise dot3-tlv {max-frame-
size} command.
Parameters
max-frame-size
Defaults
none
Command Modes
CONFIGURATION (conf-lldp) and INTERFACE (conf-if-
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
956
Enter the keywords port-vlan-id to advertise the port VLAN
identification TLV.
Enter the keywords vlan-name to advertise the vlan-name TLV.
This keyword is only supported on the C-Series and S-Series.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series. Added the vlan-name option.
Introduced on the C-Series.
Introduced on the E-Series.
– enables LLDP globally.
– debugs LLDP.
– displays the LLDP neighbors.
– displays the LLDP running configuration.
Enter the keywords max-frame-size to advertise the dot3
maximum frame size.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
interface -lldp)
interface -lldp)