Neighbor Distribute-List - Dell Force10 Z9000 Reference Manual

route-map
name
Defaults Not configured.
Command Modes ROUTER BGP Address Family (conf-router_bgp_af)
Command History
Version 7.8.1.0
Version 7.7.1.0
Version 7.6.1.0

neighbor distribute-list

Distribute BGP information using an established prefix list.
C-Series, E-Series TeraScale, S-Series
Syntax neighbor [ip-address | peer-group-name] distribute-list prefix-
list-name [in | out]
To delete a neighbor distribution list, use the no neighbor [ip-address | peer-
group-name] distribute-list prefix-list-name [in | out] command.
Parameters
ip-address
peer-group-name
prefix-list-name
in
out
Defaults Not configured.
Command Modes ROUTER BGP Address Family (conf-router_bgp_af)
Command History
Version 7.8.1.0
Version 7.7.1.0
Version 7.6.1.0
Usage Other BGP filtering commands include: neighbor filter-list, ip as-path
Information
access-list, and neighbor route-map.
Related
ip as-path access-list
Commands
neighbor filter-list
neighbor route-map
426
map-
(OPTIONAL) Enter the keyword route-map followed by the name of
a configured route map.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced IPv6 MGBP on the E-Series.
Enter the IP address of the neighbor in dotted decimal format.
Enter the name of the peer group to apply the distribute list filter to all
routers in the peer group.
Enter the name of an established prefix list.
If the prefix list is not configured, the default is permit (to allow all
routes).
Enter the keyword in to distribute only inbound traffic.
Enter the keyword out to distribute only outbound traffic.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced IPv6 MGBP on the E-Series.
– configures the IP AS-Path ACL.
– assigns a AS-PATH list to a neighbor or peer group.
– assigns a route map to a neighbor or peer group.