Neighbor Remove-Private-As; Neighbor Route-Map - Dell Force10 Z9000 Reference Manual

neighbor remove-private-as

Remove private AS numbers from the AS-PATH of outgoing updates.
C-Series, E-Series TeraScale, S-Series
Syntax neighbor {ip-address | peer-group-name} remove-private-as
To return to the default, use the no neighbor {ip-address | peer-group-name}
remove-private-as command.
Parameters
ip-address
peer-group-name
Defaults Disabled (that is, private AS numbers are not removed).
Command Modes ROUTER BGP Address Family (conf-router_bgp_af)
Command History
Version 7.8.1.0
Version 7.7.1.0
Version 7.6.1.0

neighbor route-map

Apply an established route map to either incoming or outbound routes of a BGP neighbor or peer group.
C-Series, E-Series TeraScale, S-Series
Syntax neighbor {ip-address | peer-group-name} route-map map-name {in
| out}
To remove the route map, use the no neighbor {ip-address | peer-group-
name} route-map map-name {in | out} command.
Parameters
ip-address
peer-group-name
map-name
in
out
Defaults Not configured.
Command Modes ROUTER BGP Address Family (conf-router_bgp_af)
Enter the IP address of the neighbor to remove the private AS
numbers.
Enter the name of the peer group to remove the private AS numbers.
Introduced on the S-Series.
Introduced on the C-Series. Added 4-byte support.
Introduced IPv6 MGBP on the E-Series.
Enter the IP address of the neighbor in dotted decimal format.
Enter the name of the peer group.
Enter the name of an established route map.
If the Route map is not configured, the default is deny (to drop all
routes).
Enter the keyword in to filter inbound routes.
Enter the keyword out to filter outbound routes.
429