Advertise Med Guest-Voice-Signaling - Dell Force10 Z9000 Reference Manual

Parameters
vlan-id
layer2_priority
DSCP_value
priority-tagged
number
Defaults Unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Related
protocol lldp (Configuration)
Commands
debug lldp interface
show lldp neighbors
show running-config lldp

advertise med guest-voice-signaling

Configure the system to advertise a separate limited voice service for a guest user when the guest voice control packets
use a separate network policy than the voice data.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax advertise med guest-voice-signaling {vlan-id layer2_priority
DSCP_value} | {priority-tagged number}
To return to the default, use the no advertise med guest-voice-signaling
{vlan-id layer2_priority DSCP_value} | {priority-tagged number}
command.
Parameters
vlan-id
layer2_priority
DSCP_value
priority-tagged
number
Defaults unconfigured.
968
Enter the VLAN ID. The range is 1 to 4094.
Enter the Layer 2 priority. The range is 0 to 7.
Enter the DSCP value. The range is 0 to 63.
Enter the keywords priority-tagged followed the Layer 2
priority. The range is 0 to 7.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
– enables LLDP globally.
– debugs LLDP.
– displays the LLDP neighbors.
– displays the LLDP running configuration.
Enter the VLAN ID. The range is 1 to 4094.
Enter the Layer 2 priority. The range is 0 to 7.
Enter the DSCP value. The range is 0 to 63.
Enter the keywords priority-tagged followed the Layer 2
priority. The range is 0 to 7.