Deny - Dell Force10 Z9000 Reference Manual

Parameters
prefix-name
Defaults Clears "hit" counters for all prefix lists unless a prefix list is specified.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 8.1.1.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.1
Related ip prefix-list
Commands

deny

Configure a filter to drop packets meeting the criteria specified.
C-Series, E-Series, S-Series, Z-Series
Syntax deny ip-prefix [ge min-prefix-length] [le max-prefix-length]
To delete a drop filter, use the no deny ip-prefix command.
Parameters
ip-prefix
ge
length
le
length
Defaults Not configured.
Command Modes PREFIX-LIST
Command History
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
(OPTIONAL) Enter the name of the configured prefix list to clear only
counters for that prefix list, up to 140 characters long.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Increase the name string to accept up to 140 characters. Prior to
7.8.1.0, names were up to 16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— configures a prefix list.
Specify an IP prefix in the network/length format. For example,
35.0.0.0/ 8 means match the first 8 bits of address 35.0.0.0.
min-prefix-
(OPTIONAL) Enter the keyword ge and then enter the minimum prefix
length, which is a number from zero (0) to 32.
max-prefix-
(OPTIONAL) Enter the keyword le and then enter the maximum prefix
length, which is a number from zero (0) to 32.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
277