Show Linecard Boot-Information - Dell Force10 Z9000 Reference Manual

show linecard boot-information

View the line card status and boot information.
E-Series
Syntax show linecard boot-information
Command Modes
Command History
Version 8.1.1.0
Version 6.5.1.4
Usage
show linecard
Information
boot-
information
Field
#
Status
CurType
Serial number
Booted from
Next boot
Cache boot
Boot flash
The display area of this command uses the maximum 80 character length. If your display area
is not set to 80 characters, the display wraps.
• EXEC
• EXEC Privilege
Introduced on the E-Series ExaScale.
Introduced on the E-Series.
Description
Displays the line card slot numbers, beginning with slot 0. The
number of slots listed is dependent on your chassis: 0 to 13 on the
E1200, 0 to 13 on the E1200, 0 to 5 on the E300.
Indicates if a line card is online, offline, or booting. If a line card is
not detected in the slot, a hyphen ( - ) is displayed.
Displays the line card identification number;, for example, EXW4PF.
Displays the line card serial number.
Indicates whether the line card cache booted or system booted. In
addition, the image with which the line card booted is also displayed.
•
•
Indicates if the next line card boot is a cache boot or system boot
and which image is used in the boot.
Displays the system image in cache boot flash partition A: and B: for
the line card. If the cache boot does not contain a valid image,
"invalid" is displayed.
Displays the two possible Boot flash versions. The [b] next to the
version number is the current boot flash, that is the image used in
the last boot.
If the line card cache booted, the output is A: or B: followed
by the image in the flash partition (A: 6.5.1.4 or B: 6.5.1.4).
If the line card system booted, the display is the current
FTOS version number (6.5.1.4).
153