Hardware Commands; Clear Hardware Stack-Unit - Dell Force10 Z9000 Reference Manual

Hardware Commands

These commands display information from a hardware sub-component or ASIC.

clear hardware stack-unit

Clear statistics from selected hardware components.
S-Series, Z-Series
Syntax clear hardware stack-unit 0–7 {counters | unit 0–1 counters |
cpu data-plane statistics | cpu party-bus statistics | stack-
port 0–52}
Parameters
stack-unit
counters
unit
cpu data-plane
statistics
cpu party-bus
statistics
stack-port
Defaults none
Command Modes EXEC Privilege
Command History
Version 8.3.11.0
Version 7.8.1.0
Related show hardware stack-unit
Commands statistics of the designated component of the designated stack member.
0-7
Enter the keywords stack-unit followed by 0 to 7 to select a
particular stack member and then enter one of the following
command options to clear a specific collection of data.
Enter the keyword counters to clear the counters on the selected
stack member.
0–1 counters
Enter the keyword unit along with a port-pipe number, from 0 to 1,
followed by the keyword counters to clear the counters on the
selected port-pipe.
NOTE: S25 models (S25N, S25P, S25V, etc.) have only port-pipe 0.
Enter the keywords cpu data-plane statistics to clear the
data plane statistics.
Enter the keywords cpu party-bus statistics to clear the
management statistics.
0–52 Enter the keywords stack-port followed by the port number of the
stacking port to clear the statistics of the particular stacking port. The
range is 0 to 52.
Introduced on the Z9000.
Introduced on the S-Series.
– displays the data plane or management plane input and output
579