Show Ipv6 Cam Stack-Unit - Dell Force10 Z9000 Reference Manual

Prefix
----------------------------------------------------------
[ 4096] 500::/64
[ 4096] 700::/64
FTOS#

show ipv6 cam stack-unit

Displays the IPv6 CAM entries for the specified stack-unit.
S-Series, Z-Series, S4810
Syntax show ipv6 cam stack-unit unit-number port-set {0-1} [summary |
index | ipv6 address]
Parameters
unit-number
port-set
summary
index
ipv6-address
Defaults none
Command Modes
Command History
Version 9.0.0.0
Version 8.3.7.1
Version 8.4.2.1
Usage
On the S4810, First-Hop information is not shown for installed routes in the IPv6 content
Information
addressable memory (CAM). However, the same is shown in the forwarding information base
(FIB).
First-Hop
: : 0 0
: : 0 0
Enter the stack unit's ID number. The range is 0 to 11.
Enter the keyword Port Set.
(OPTIONAL) Enter the keyword summary to display a table listing
network prefixes and the total number prefixes which can be entered
into the IPv6 CAM.
(OPTIONAL) Enter the index in the IPv6 CAM.
Enter the IPv6 address in the x:x:x:x::x/n format to display networks
that have more specific prefixes. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Mac-Addr Port VId EC
:00:00:00:00:00 CP
:00:00:00:00:00 CP
0 0
0 0
847