Local Ip Network - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

local ip network

local ip network ipNetwork ipMask
Syntax
no local ip network
Command introduced in JUNOSe Release 7.3.0.
Release Information
Specifies networks that are reachable through the IPSec tunnel. You can configure
Description
up to 16 networks for this method of " split-tunneling." The no version removes the
specified network from the reachable list.
Options
IPSec Tunnel Profile Configuration
Mode
ipNetwork IP network reachable through the secure connection
ipMask—IPv4 subnetwork mask for the IP network
Chapter 12: L Commands
1219
local ip network