Patch Run - 3Com S7906E Command Reference Manual

patch run

Syntax
patch run patch-number [ slave | slot slot-number ]
View
System view
Default Level
3: Manage level
Parameters
patch-number: Sequence number of a patch. The valid values of this argument depend on the patch file
used.
slave: Specifies the standby main board.
slot slot-number: Specifies a board by its slot number. The value range of this argument varies with the
device model.
Description
Use the patch run command to confirm the running of the specified patch and all the ACTIVE patches
before the specified patch number.
This operation is applicable to patches in the ACTIVE state only.
If the running of a patch is confirmed, after the system reboots, the original ACTIVE patches are still
ACTIVE and take effect.
If you execute this command without specifying slave or slot-number, the command confirms the
running of the specified patch(es) on the active main board.
Examples
# Confirm the running of patch 3 and all the ACTIVE patches before patch 3 on board 5.
<Sysname> system-view
[Sysname] patch run 3 slot 5
1-5