Display Vrrp Statistics - 3Com S7906E Command Reference Manual

Field
Track IF
Track Object
Pri Reduced
Switchover
Virtual IP
Virtual MAC
Master IP

display vrrp statistics

Syntax
display vrrp statistics [ interface interface-type interface-number [ vrid virtual-router-id ] ]
View
Any view
Default Level
1: Monitor level
Parameters
interface interface-type interface-number: Displays VRRP statistics of the specified interface.
interface-type interface-number specifies an interface by its type and number.
vrid virtual-router-id: Displays statistics of the specified VRRP group. virtual-router-id specifies a VRRP
group by its group number, in the range 1 to 255.
Description
Use the display vrrp statistics command to display statistics about VRRP.
If you specify both an interface and a VRRP group, only the statistics about the specified VRRP group
are displayed; if you only specify an interface, the statistics about all the VRRP groups on the interface
are displayed; if you specify neither, the statistics about all the VRRP groups on the device are
displayed.
Examples
# Display the statistics about all VRRP groups.
The interface to be tracked. It is displayed only after the
execution of the vrrp vrid track interface command.
The object to be tracked. It is displayed only after the execution
of the vrrp vrid track command.
The priority value that is reduced when the monitored interface
is down or when the status of the monitored Track object turns
to negative.
It is displayed only after the execution of the vrrp vrid track
interface command or the vrrp vrid track command.
Switchover mode. If the status of the monitored Track object
turns to negative, the backup will switch to the master
immediately.
Virtual IP addresses of the VRRP group
Virtual MAC address corresponding to the virtual IP address of
the VRRP group. It is displayed only when the switch is in the
state of master.
Primary IP address of the interface which belongs to the switch
in the state of master
1-3
Description