Display Patch-Information - 3Com S7906E Command Reference Manual

1
Hotfix Configuration Commands
Hotfix Configuration Commands

display patch-information

Syntax
display patch-information [ slave | slot slot-number ]
View
Any view
Default Level
3: Manage level
Parameters
slave: Displays the hotfix information on the backup main board.
slot slot-number: Displays the hotfix information on the specified board. slot-number represents the slot
number of the board. The value range of this argument varies with the device model.
Description
Use the display patch-information command to display the hotfix information on the specified board.
If you execute this command without specifying slave or slot-number, the command is applicable to the
patches on the active main board.
Examples
# Display the hotfix information of the device.
<Sysname> display patch-information
Patch version
Software version
Temp patch number
Common patch number
Current patch number
Running patch number
Active patch number
Patch area length
Patch area start address: 0x18c1800
Table 1-1 display patch-information command output description
Temp patch number
Common patch number
: PATCH-XXX001
: COMWAREV500R002B45D001
: 0
: 2
: 2
: 0
: 0
: 0xe0000
Field
Number of temporary patches
Number of common patches
1-1
Description