Slave Switchover { Disable | Enable - 3Com S7906E Command Reference Manual

slave switchover { disable | enable }

Syntax
slave switchover { disable | enable }
View
System view
Default Level
2: System level
Parameters
disable: Disables manual configuration of the switchover between the AMB and SMB.
enable: Enables manual configuration of the switchover between the AMB and SMB.
Description
Use the slave switchover disable command to disable manual switchover function between the AMB
and SMB.
Use the slave switchover enable command to enable manual switchover function between the AMB
and SMB.
By default, manual configuration of the switchover between the AMB and SMB is enabled.
Related commands: slave switchover.
Examples
# Enable manual configuration of the switchover between the AMB and SMB.
<Sysname> system-view
[Sysname] slave switchover enable
1-3