Vrrp Ping-Enable - 3Com S7906E Command Reference Manual

View
System view
Default Level
2: System level
Parameters
real-mac: Associates the real MAC address of the interface with the virtual IP address of the VRRP
group.
virtual-mac: Associates the virtual MAC address of the switch with the virtual IP address of the VRRP
group.
Description
Use the vrrp method command to set the mappings between the virtual IP addresses and the MAC
addresses of the VRRP groups.
Use the undo vrrp method command to restore the default mapping.
By default, the virtual MAC address of the VRRP group is associated with the virtual IP address.
You need to configure the mapping between the virtual IP address and the MAC address before
configuring a VRRP group. Otherwise, your configuration will fail.
Examples
# Associate the virtual IP address of the VRRP group with the real MAC address of the interface.
<Sysname> system-view
[Sysname] vrrp method real-mac

vrrp ping-enable

Syntax
vrrp ping-enable
undo vrrp ping-enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the vrrp ping-enable command to configure a VRRP group to respond to the ping packets
destined for its virtual IP address.
Use the undo vrrp ping-enable command to disable a VRRP group from responding to the ping
packets destined for its virtual IP address.
1-7