Reset Vrrp Statistics; Vrrp Vrid Authentication-Mode - 3Com S7906E Command Reference Manual

Priority Zero Pkts Rcvd
Advertise Rcvd
Advertise Sent
Global statistics
CheckSum Errors
Version Errors
VRID Errors

reset vrrp statistics

Syntax
reset vrrp statistics [ interface interface-type interface-number [ vrid virtual-router-id ] ]
View
User view
Default Level
1: Monitor level
Parameters
interface interface-type interface-number: Clears VRRP statistics of a specified interface.
interface-type interface-number specifies an interface by its type and number.
vrid virtual-router-id: Clears VRRP statistics of the specified VRRP group. virtual-router-id specifies a
VRRP group by its group number, in the range 1 to 255.
Description
Use the reset vrrp statistics command to clear VRRP statistics.
If you specify both an interface and a VRRP group, the statistics about the specified VRRP group on the
specified interface are cleared; if you specify only the interface, the statistics about all the VRRP groups
on the interface are cleared; if you specify neither, the statistics about all the VRRP groups on the
device are cleared.
Examples
# Clear the statistics about all the VRRP groups on the device.
<Sysname> reset vrrp statistics

vrrp vrid authentication-mode

Syntax
vrrp vrid virtual-router-id authentication-mode { md5 | simple } key
undo vrrp vrid virtual-router-id authentication-mode
Field
Number of received advertisements with the priority of 0
Number of received advertisements
Number of advertisements sent
Statistics about all VRRP groups
Total number of packets with checksum errors
Total number of packets with version errors
Total number of packets with VRID errors
Description
1-5