Reset Signaling Statistics - 3Com CoreBuilder 7000 Management Manual

Reset Signaling Resets the signaling counters for a specified port.
Statistics
Command Actions
Enter the menu sequence: (4) STS: Statistics
Enter a parameter at the prompt
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
The signaling statistics are reset for port <3.1> and the following
message is displayed.
Reset Q93B statistics completed successfully.
Parameter
Port ID
4 10 3.1
(10) SIR: Signaling-reset counters
Format or Range
slot.port (0.0 for all ports)
4 10 [parameters]
Signaling statistics are reset for the specified port.
Reset Q93B statistics completed
successfully.
Signaling Statistics 249