Display Vrrp Ipv6 Statistics - 3Com S7906E Command Reference Manual

display vrrp ipv6 statistics

Syntax
display vrrp ipv6 statistics [ interface interface-type interface-number [ vrid virtual-router-id ] ]
View
Any view
Default Level
1: Monitor level
Parameters
interface interface-type interface-number: Displays VRRP statistics information of the specified
interface. interface-type interface-number specifies an interface by its type and number.
vrid virtual-router-id: Displays statistics information of the specified VRRP group. virtual-router-id
specifies a VRRP group by its group number, in the range 1 to 255.
Description
Use the display vrrp ipv6 statistics command to display statistics about VRRP for IPv6.
If you specify both an interface and a VRRP group, only the statistics about the specified VRRP group
are displayed; if you only specify an interface, the statistics about all the VRRP groups on the interface
are displayed; if you specify neither, the statistics about all the VRRP groups on the device are
displayed.
Examples
# Display the statistics about all VRRP groups for IPv6.
<Sysname> display vrrp ipv6 statistics
Interface
VRID
CheckSum Errors
Invalid Type Pkts Rcvd : 0
Hop Limit Errors
Invalid Auth Type
Packet Length Errors
Become Master
Advertise Rcvd
Advertise Sent
Interface
VRID
CheckSum Errors
Invalid Type Pkts Rcvd : 0
Hop Limit Errors
Invalid Auth Type
Packet Length Errors
Become Master
Advertise Rcvd
: Vlan-interface100
: 80
: 0 Version Errors
Advertisement Interval Errors
: 0 Auth Failures
: 0 Auth Type Mismatch
: 0 Address List Errors
: 1 Priority Zero Pkts Rcvd
: 0 Priority Zero Pkts Sent
: 20
: Vlan-interface200
: 10
: 0 Version Errors
Advertisement Interval Errors
: 0 Auth Failures
: 0 Auth Type Mismatch
: 0 Address List Errors
: 1 Priority Zero Pkts Rcvd
: 0 Priority Zero Pkts Sent
1-16
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0