Aaa Configuration Commands; Access-Limit; Attribute - 3Com 5500G-EI Command Reference Manual

AAA Configuration
Commands

access-limit

attribute

This section describes how to use the AAA configuration commands on your
Switch 5500G-EI.
Syntax
access-limit { disable | enable
View
ISP Domain View
Parameter
No limit to the supplicant number in the current ISP domain.
disable:
max-user-number
enable
current ISP domain, ranging from 1 to 1048
Description
Use the
access-limit
supplicants in the current ISP domain.
By default, there is no limit to the amount of supplicants in the current ISP domain.
This command limits the amount of supplicants contained in the current ISP
domain. The supplicants may contend with each other for the network resources.
So setting a suitable limit to the amount will guarantee the reliable performance
for the existing supplicants.
Example
Sets a limit of 500 supplicants for the ISP domain, marlboro.net.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]domain marlboro.net
New domain added.
[SW5500-isp-marlboro.net]access-limit enable 500
Syntax
ip-address
attribute { ip
access-limit max-user-number
ip-address port portnum
undo attribute {ip | mac | idle-cut | access-limit | vlan | location
}
View
Local User View
Parameter
Allows/disallows the local users to enable the idle-cut
second
idle-cut :
function. (The specific data for this function depends on the configuration of the
ISP domain where the users are located.) The argument
idle-cut time, which is in the range of 60 to 7200 seconds.
max-user-number
Specifies the maximum supplicant number in the
:
command to configure a limit to the amount of
mac-address
| mac
| vlan vlanid
| port portnum

AAA Configuration Commands

}
second
| idle-cut
| location { nas-ip
}
defines the
minute
359
|