STMicroelectronics STM32WL5 Series Reference Manual page 435

RM0453
Bits 2:0 EXTI0[2:0]: EXTI0 configuration bits
Note: Some of the I/O pins mentioned in this register may not be available on small packages.
11.2.4 SYSCFG external interrupt configuration register 2
(SYSCFG_EXTICR2)
Address offset: 0x00C
Reset value: 0x0000 0000
31 30 29
Res. Res. Res. Res.
15 14 13
Res. EXTI7[2:0]
rw rw
Bits 31:15 Reserved, must be kept at reset value.
Bits 14:12 EXTI7[2:0]: EXTI7 configuration bits
These bits are written by software to select the source input for the EXTI7 external interrupt.
000: PA7 pin
001: PB7 pin
Others: Reserved
Bit 11 Reserved, must be kept at reset value.
Bits 10:8 EXTI6[2:0]: EXTI6 configuration bits
These bits are written by software to select the source input for the EXTI6 external interrupt.
000: PA6 pin
001: PB6 pin
010: PC6 pin
0Others: Reserved
Bit 7 Reserved, must be kept at reset value.
Bits 6:4 EXTI5[2:0]: EXTI5 configuration bits
These bits are written by software to select the source input for the EXTI5 external interrupt.
000: PA5 pin
001: PB5 pin
010: PC5 pin
Others: Reserved
Bit 3 Reserved, must be kept at reset value.
These bits are written by software to select the source input for the EXTI0 external interrupt.
000: PA0 pin
001: PB0 pin
010: PC0 pin
Others: Reserved
28 27 26 25
Res. Res. Res.
12 11 10 9
Res. EXTI6[2:0]
rw rw rw
System configuration controller (SYSCFG)
24 23 22
Res. Res. Res.
8 7 6
Res. EXTI5[2:0]
rw rw
RM0453 Rev 5
21 20 19 18
Res. Res. Res. Res.
5 4 3 2
Res.
rw rw rw
17 16
Res. Res.
1 0
EXTI4[2:0]
rw rw
435/1450
445