STMicroelectronics STM32WL5 Series Reference Manual page 383

RM0453
Bits 15:13 Reserved, must be kept at reset value.
Bit 12 Reserved, must be kept at reset value.
Bits 11:8 COREID[3:0]: COREID of semaphores to be cleared
Bits 7:0 Reserved, must be kept at reset value.
8.4.8 HSEM clear semaphore key register (HSEM_KEYR)
Address offset: 0x144
Reset value: 0x0000 0000
31 30 29
rw rw rw
15 14 13
Res. Res. Res. Res.
Bits 31:16 KEY[15:0]: Semaphore clear key
Bits 15:0 Reserved, must be kept at reset value.
This field can be written by software and is always read 0.
This field indicates the COREID for which the semaphores are cleared when writing the
HSEM_CR.
28 27 26 25
rw rw rw rw
12 11 10 9
Res. Res. Res.
This field can be written and read by software.
Key value to match when clearing semaphores.
24 23 22
KEY[15:0]
rw rw rw
8 7 6
Res. Res. Res.
RM0453 Rev 5
Hardware semaphore (HSEM)
21 20 19 18
rw rw rw rw
5 4 3 2
Res. Res. Res. Res.
17 16
rw rw
1 0
Res. Res.
383/1450
385