Output:roscillator[:State] <Boolean> - Agilent Technologies EPM-P Series Programming Manual

OUTput Subsystem
OUTPut:ROSCillator[:STATe] <boolean>
OUTPut:ROSCillator[:STATe] <boolean>
This command enables/disables the POWER REF output.
Syntax
OUTP
Example
OUTP:ROSC:STAT 1
Reset Condition
On reset, the POWER REF output is disabled.
Query
OUTPut:ROSCillator[:STATe]?
The query command enters a 1 or 0 into the output buffer indicating
whether or not the POWER REF is enabled.
•
•
Query Example
OUTP:ROSC?
8-10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:ROSC :STAT
1 is returned when the POWER REF output is enabled.
0 is returned when the POWER REF output is disabled.
EPM-P Series Power Meters Programming Guide
Space
0|OFF
1|ON
?
This command enables the
POWER REF output.
This command queries the status
of the POWER REF output.