Agilent Technologies EPM-P Series Programming Manual page 457

SYSTem:COMMunicate:SERial[:RECeive]:BITs <numeric_value>
This command sets the word length for both the receiver and the
transmitter. The word length for the receiver and transmitter are tied
together and can either be set by this command or the equivalent
transmitter command :TRANsmit:BITs.
Syntax
SYST
Parameters
Item
numeric_value
Example
SYST:COMM:SER:REC:BITs 8
Reset Condition
On reset, the word length is unaffected.
Query
SYSTem:COMMunicate:SERial[:RECeive]:BITs?
The query returns the current setting of the receive/transmit word length.
Query Example
SYST:COMM:SER:REC:BITs?
Agilent E4416A/E4417A Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SYSTem:COMMunicate:SERial[:RECeive]:BITs <numeric_value>
:COMM :REC
:SER
Description/Default
A numeric value for the word length
SYSTem Subsystem
Space
numeric_value
:BIT
?
Range of Values
7 or 8
This command sets the receiver
and transmitter word length to 8.
This command queries the setting
of the receive/transmit word
length.
11-11