Agilent Technologies EPM-P Series Programming Manual page 223

CALCulate Subsystem
CALCulate[1]|2|3|4:GAIN[:MAGNitude] <numeric_value>
CALCulate[1]|2|3|4:GAIN[:MAGNitude] <numeric_value>
This command is used to enter a value for the display offset on the
specified window/measurement. The display offset is applied to the
measurement signal after any math calculation.
Entering a value using this command automatically turns the
CALCulate[1]|2|3|4:GAIN:STATe command to ON.
Syntax
CALC
Parameters
Item
numeric_value
Example
CALC2:GAIN 20
Reset Condition
On reset, the display offset is set to 0 dB (DEF).
3-8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:GAIN :MAGN
1
2
3
4
Description/Default
A numeric value for the display offset:
• DEF: the default value is 0 dB.
• MIN: -100.000 dB.
• : +100.000 dB.
MAX
Space numeric_value
DEF
MIN
MAX
Space
?
This command enters a display
offset of 20 dB to the
window/lower measurement.
EPM-P Series Power Meters Programming Guide
MIN
MAX
Range of Values
-100.000 to
+100.000 dB
DEF
MIN
MAX