Summary Of Commands - Agilent Technologies EPM-P Series Programming Manual

Power meters

Hide thumbs Also See for EPM-P Series:

Table of Contents

Power Meter Remote Operation

Summary Of Commands

This Guide details the commands available for both the E4416A and

the E4417A power meters. As the E4416A is a single channel power

meter only channel A can be selected. Where instances of channel

selection are detailed in this chapter they are only relevant for the

This section summarizes the SCPI (Standard Commands for

Programmable Instruments) commands available to program the power

meter. All the commands listed also have queries unless otherwise stated

in the "Notes" column. Refer to later chapters for more details on each

In different subsystems the numeric suffix of program mnemonics can

represent either a channel selection or a window selection. Refer to the

appropriate command description to verify the meaning of the numeric

With commands that require you to specify a channel, Channel A is

represented by a 1 and Channel B by a 2. If you omit the channel number,

Channel A is assumed.

With commands that require you to specify a window, the upper window is

represented by a 1 and the lower window by a 2. If you omit the window

number, the upper window is assumed.

EPM-P Series Power Meters Programming Guide

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents