Agilent Technologies EPM-P Series Programming Manual page 294

Parameters
Item
numeric_value
Example
DISP:WIND2:TRAC:LOW 10
Reset Condition
On reset, the value is set to -50 dBm.
Query
DISPlay:[WINDow[1]|2]:TRACe:UPPer [MIN|MAX]
The query returns the current setting of the trace window lower scale
limit or the value associated with MIN or MAX. The format of the response
is <NR3>.
Query Example
DISP:WIND2:TRAC:LOW?
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DISPlay[:WINDow[1]|2]:TRACe:LOWer <numeric_value>
Description/Default
A numeric value for the trace window
lower scale limit.
• DEF: the default is 20 dBm
• MIN: -150 dBm
• MAX: 230 dBm
Units used are resolved to 1 dBm
This command sets the trace
window lower scale limit to
10 dBm
This command queries the trace
window lower scale limit of the
lower window
DISPlay Subsystem
Range of Values
to dBm
-150 230
DEF
MIN
MAX
5-29