System:communicate:serial:transmit:echo <Boolean> - Agilent Technologies EPM-P Series Programming Manual

SYSTem:COMMunicate:SERial:TRANsmit:ECHO <boolean>
This command turns echo mode on and off, allowing the power meter to be
controlled by a dumb terminal that may require its transmitted characters
to be echoed. If ON is specified, data received by the receiver is transmitted
back to the sender (echo on). If OFF is specified, data received by the
receiver is not transmitted back to the sender (echo off).
Syntax
SYST
Example
SYST:COMM:SER:TRAN:ECHO ON
Reset Condition
On reset, the echo selection is unaffected.
Query
SYSTem:COMMunicate:SERial:TRANsmit:ECHO?
The query returns the current setting of the transmit/receive word length.
•
•
Agilent E4416A/E4417A Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SYSTem:COMMunicate:SERial:TRANsmit:ECHO <boolean>
:COMM :SER
:TRAN
ON is returned if the power meter is set to return received data
back to the sender (echo on).
OFF is returned if the power meter is not set to return received
data back to the sender (echo off).
SYSTem Subsystem
Space
:ECHO
ON
OFF
?
This command sets the power
meter to transmit any data
received back to the sender.
11-21