Agilent Technologies EPM-P Series Programming Manual page 472

SYSTem Subsystem
SYSTem:COMMunicate:SERial:TRANsmit:SBITs <numeric_value>
SYSTem:COMMunicate:SERial:TRANsmit:SBITs <numeric_value>
This command sets the number of stop bits expected by the receiver on
received data and the number of stop bits included by the transmitter in
transmitted data.
Syntax
SYST
Parameters
Item
numeric_value
Example
SYST:COMM:SER:TRAN:SBIT 2
Reset Condition
On reset, the number of stop bits is unaffected.
Query
SYSTem:COMMunicate:SERial:TRANsmit:SBITs?
The query returns the current setting of the transmit/receive stop bits.
Query Example
SYST:COMM:SER:TRAN:SBIT?
11-26
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:COMM :TRAN
:SER
Description/Default
A numeric value for the number of stop
bits.
Space numeric_value
:SBIT
?
Range of Values
1 or 2
This command sets the number of
stop bits for the transmitter and
receiver to 2.
This command queries the setting
of the receive/transmit stop bits.
Agilent E4416A/E4417A Programming Guide