Agilent Technologies EPM-P Series Programming Manual page 527

Query
INITiate[1]|2:CONTinuous:SEQuence?
The query enters a 1 or 0 into the output buffer.
•
•
Query Example
INIT2:CONT:SEQ?
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
INITiate:CONTinuous:SEQuence[1]|2 <boolean>
1 is returned when there is continuous triggering.
0 is returned when there is only a single trigger.
TRIGger Subsystem
This command queries whether
channel B is set for single or
continuous triggering.
13-11