The Memory:free Commands - Agilent Technologies EPM-P Series Programming Manual

MEMory Subsystem

The MEMory:FREE Commands

The MEMory:FREE Commands
These commands are used to return information on the amount of free
memory space available for sensor calibration tables 8480 Series power
sensors and N8480 Series sensors with Option CFT only), frequency
dependent offset tables, and save/recall registers.
The following commands are described in this section:
MEMory:FREE[:ALL]?
MEMory:FREE:STATe?
MEMory:FREE:TABLe?
EPM-P Series Power Meters Programming Guide 7-13
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com