Service:sensor[1]|2:Snumber? - Agilent Technologies EPM-P Series Programming Manual

SERVice:SENSor[1]|2:SNUMber?

This query returns the serial number for E-Series and N8480 Series
sensors. Serial number information is stored in the sensor's EEPROM.
Syntax
SERV
Example
SERV:SENS2:SNUM?
Error Messages
• If no sensor is connected, error -241, "Hardware missing" occurs.
• If a non E-Series or N8480 Series sensor is connected, error -241
"Hardware missing" occurs.
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:SENS 1 :SNUM
2
SERVice Subsystem
SERVice:SENSor[1]|2:SNUMber?
?
This query returns the serial
number of the E-Series or N8480
Series sensor connected to channel
B.
15-25