Agilent Technologies EPM-P Series Programming Manual page 278

Parameters
Item
numeric_value
Example
DISP:WIND2:ANAL:UPP 50
Reset Condition
On reset, the upper scale limit is set to 20 dBm.
Query
DISPlay:[WINDow[1]|2]:ANALog:UPPer [MIN|MAX]
The query returns the current setting of the analog meter's upper scale
limit, or the value associated with MIN or MAX. The format of the response
is <NR3>. The units in which the results are returned are determined by
the current setting of UNIT:POWer and CALCulate:RELative:STATe as
shown in Table 5-2.
Query Example
DISP:WIND2:ANAL:UPP?
EPM-P Series Power Meters Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DISPlay[:WINDow[1]|2]:ANALog:UPPer <numeric_value>
Description/Default
A numeric value for the analog meter
upper scale limit:
• DEF: the default is 20 dBm
• MIN: -150 dBm
• MAX: 230 dBm
Units used are determined by the
current setting of UNIT:POWer and
CALCulate:RELative:STATe as
shown in the previous table.
This command sets the lower
window's analog meter upper scale
limit to 50 dBm
This command queries the upper
scale limit set on the analog meter
in the lower window
DISPlay Subsystem
Range of Values
to dBm
-150 230
DEF
MIN
MAX
5-13